Therma Series

CONSTRUCTION: The Therma Series doors offers 3 different models all are made from hot dipped galvanized (G 40) wood grain textured steel skins that are sandwiched with a polystyrene core. This type of construction forms a natural thermal barrier between front and back of door. 20 gauge steel backer plates are toggle locked to the inside of the back skin prior to assembly. Exterior skins are secured to a polystyrene core with urethane adhesive, a method of construction that is unparalleled in strength. R16*, R12* and R10.4* to fit your needs.

* R Values are calculated specifically for the colder climates and offer the best long term insulating value.

NOMINAL SPECIFICATIONS:

  • Models:
    • 650, R16* – 3″ Thick High Density EPS (expanded polystyrene)
    • 308TM, R12* – 2″ Thick High Density EPS
    • 308, R10.4 – 2″ Thick EPS
  • Door Face: Wood grain texture, pencil grooves 4″ on center
  • Section Heights: 21″ and 24″
  • Section Joint: Tongue and Groove joint between sections with thermal break and flexible vinyl seal
  • 20 gauge steel concealed backer plates, pre-painted 20 GA galvanized end caps
  • Finish: 4-Coat Process, Galvanized, Phosphate Treated, Baked-on Epoxy Base Coat, and Polyester Top Coat
  • Colors selection: White
  • Bottom weather seal: U-shape loop type PVC with adjustable aluminum retainer
  • 1 Year Limited Warranty
STANDARD WIDTHS: 8′-2″ 9′-2″ 10′-2″ 12′-2″ 14′-2″ 16′-2″ 18′-2″ 20′-2″ 22′-2″ 24′-2″
Bays Horizontally 2 2 3 3 4 4 5 5 6 6

STANDARD HEIGHTS: 8′-1″ 9′-1″ 10′-1″ 12′-1″ 14′-1″ 16′-1″
Sections Vertically 4 5 5 6 7 8

OPTIONS:

  • Widths up to 24′, heights up to 16′ (larger sizes are available in some cases depending on the door weight, depends on door model and windows required)
  • 25,000, 50,000 & 100,000 high cycle torsion springs
  • Windows, Standard with 1/8″ Clear Single-pane Glass
  • Tempered, obscure, insulated glass or special glazing as specified by customer
  • Manual chain hoist or electric operation
  • Low clearance, high lift or vertical lift track and hardware
  • Powder coated track and hardware

HARDWARE: 15″ radius torsion hardware; track is 2″ hemmed and bracket mounted. 3″ track supplied when required by weight. Heavy duty steel rollers, non corrosive door fixtures and 14 gauge graduated hinges are standard. Double end hinges and long stem rollers are included on doors as required by width and weight. U-shaped galvanized struts are supplied as required by width and weight to keep the door rigid. All doors are standard with interior slide bolt lock.

AVAILABLE COLORS:

Bright White

* The actual color may slightly vary from what you are seeing, depending on the color calibration of your computer monitor.

AVAILABLE GLASS: